Home

Client comments

Steel boats

The fuel tanks went fine as did the Tapox application. The Fertan rust converter is continuing to prove useful.        RM  Kent

I have some panels inside which are nicely rusted, and I've already applied Fertan to one of them, and yes, it doe take a hard, black surface which looks like it'll last, so I'm gaining confidence.  RA

I'm quite impressed with Fertan so far, it does have a satisfying reaction when applied. What I have been doing, is Fertan then several coats of Ferpox and then topcoat will be going on when I'm good and ready (Chlorinated Rubber inside the cockpit lockers and anchor locker, and going to be International deck paint on the deck (could have made my own with sand, but I never seem to get an even finish that way).                    IH Plymouth

You said that if I had a steel boat I should be using Fertan. You were correct.
                                   DW  Falmouth

Vehicles

Thanks for the quick reply alan, I've used Fertan before and it gives very good results
                                                MC  Bath

I used it on the Beetle mid morning after going over with a wire brush in an angle grinder
so most of the surface looked nice and shiny, now it's shiny black and looks good.
I will have to take some photos to record another stage of the restoration.
                                    DC  IOW

Thanks for the prompt despatch of our order and for the letter and leaflet ..The Fertan is definitely for the Mini project, I use it on every welded joint and plate as an anti-corrosive surface treatment until I can get to the area with the two-pack paint. The Mini is now coming together...  You may have noticed that I ordered 2 litres this time, well that is because I have managed to convert my brother-in-law to Fertan (away from the dreaded red oxide and a lot of luck), he is my latest convert
                                      R & E  Birmingham

The best product I've tested.  It's worked particularly well in conjunction with UBS120.  SW Derbyshire

Structural

We didn't appreciate the difficulties involved in shotblasting in the town centre.  The rust converter has done a excellent job and kept the project on schedule, thanks for that.  I was initially doubtful about Ferpox but the trial pieces we did came out well. The final finish is excellent and client, architect and ourselves consider it a good result.  We are moving straight on to Darlington and will be in touch.   PE  Burton

The architects we spoke with had specified it on earlier projects and were confident about the long term benefits.   GR   Manchester

The council's attitude, and that of our office tenants, makes it impossible to shotblast the walkways.  The Fertaned areas we did for test last year took the paint well and are corrosion free.  We chipped off some areas to inspect.  Our order for 75 litres is attached.     WK, London

As you can imagine the corrosion issues in the Falkland Islands are difficult to surmount.  The treatment of the test warehouse was quick and easy and the Fertan surface took the paint well.  Please arrange for the attached order to be shipped on the December boat.              Falkland Islands