Ferpox

£16.09£62.10 (incl VAT)

  • Extreme corrosion protection 
  • Overpaintable 
  • Simple application 
  • Fast drying 
  • Temperature resistant up to 250 ° C 
  • High abrasion resistance 
SKU: N/A
Clear
  • Description
  • Additional information
  • Compressed air processing:
  • Safety Instructions

Description

FERPOX is a 1-part epoxy primer. It is lead and chromate free and temperature resistant. 

FERPOX is applied as normal primer or paint and has a particularly good adhesion to iron, steel, pre-treated aluminium or hot-dip galvanized metal. Due to its particularly high strength, FERPOX is the ideal primer for all heavily stressed or corrosion-prone metals. In the automotive sector, FERPOX is used in the following areas: subfloors, wheel arches, spray walls, frames, window frames, battery holders and much more. The application is carried out by means of a brush, roller or spray gun. For application with compressed air spray guns max. dilution is 10% nitro.

When applying with brush or roller apply one thin layer only.
1x thin layer is completely sufficient. 

Compressed air processing: 

Nozzle: 1.5 

Pressure: 2 – 4 bar 

Dilution: 

Nirous thinning (exclusively). 

Theoretical coverage: 

Different depending on surface type and processing 

Yield: Film thickness 

Wet dry area 

77μm 50μm 6.9m² / kg 

108 μm 70 μm 4.8 m² / kg 

Please do not use the product at temperatures below 10˚ C and protect from frost! All surfaces must be dry, free of grease, oil and silicone. Ideal processing temperature: approx. 20 ° C. Application up to rel. Humidity of max. 65%. Pre-treat rust and corrosion with FERTAN. 

Delivery viscosity: approx. 150 sec. DIN 4 mm 

Density: approx. 1.18 – 1.24 kg / liter 

Recoatable: approx. 6 hours at 20 ° C. 

Hardened: approx. 24 hours at 20 ° C. 

Recoatable with 1-K and 2-K standard coatings: with 2-K max. 150 μm. 

Drying time at 20 ° C: Dust-dry: approx. 30 min. – Grip: approx. 60 min. 

Temperature resistance: -40 ° C to + 250 ° C continuous load – (colour change possible) 

Colour: Basalt grey approx. RAL 7012 – silk gloss 

Additional information

Size

800ml, 2 Litre, Aero

Nozzle: 1.5

Pressure: 2 – 4 bar

Thinner: Niro thinner (only).

Theoretical yield: Different depending on surface type and processing

Yield: Film thickness

Wet Dry Surface

77µm 50 µm 6.9 m²/kg

108 µm 70 µm 4.8 m²/kg

Please do not use the product at temperatures below 10˚ C and protect it from frost! All surfaces must be dry and free of grease, oil and silicone. Ideal working temperature: approx. 20° C. Application up to relative humidity of max. 65%. Pre-treat rust and corrosion with FERTAN.

Delivery viscosity: approx. 150 sec. DIN 4 mm

Density: approx. 1.18 – 1.24 kg/litre

Overpaintable: approx. 6 hours at 20° C.

Cured: approx. 24 hours at 20° C.

Overpaintable with 1-K and 2-K standard paints: at 2-K max. 150 µm.

Drying time at 20° C: Dust-dry: approx. 30 min. – Non-slip: approx. 60 min.

Temperature resistance: -40° C to +250° C Permanent load – (color change possible)

Colour: Basalt grey approx. RAL 7012 – Silk gloss

FERPOX 

according to Regulation (EC) No 1272/2008 [CLP] 

CAUTION 

Statements
Flammable liquid and vapor. Causes skin irritation. Harmful to aquatic organisms, with long-term effect. 

safety instructions
Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Avoid release to the environment. Wear protective gloves / protective clothing / eye protection / face protection. IF ON SKIN (or hair): Remove / Take off immediately all contaminated clothing. Wash skin with water / shower.
Keep cool in a well-ventilated place. Use explosion-proof electrical equipment. 

 

FERPOX Spray 

according to Regulation (EC) No 1272/2008 [CLP] 

CAUTION 

Statements
Flammable aerosol. Causes serious eye irritation. May cause drowsiness and dizziness. Harmful to aquatic organisms, with long-term effect. 

safety instructions
Keep away from heat / sparks / open flames / hot surfaces. Do not smoke. Do not spray against an open flame or other source of ignition. Pressurized container: Do not puncture or burn, even after use. Avoid breathing dust / fume / gas / mist / vapor / spray. Wash hands thoroughly after use. Use only outdoors or in well-ventilated areas. Avoid release to the environment. 

 

You've just added this product to the cart: