Silicon remover

£4.56£49.68 (incl VAT)


  • For pre-treatment
  • Dissolves all silicones, fats and oils





Silicon remover should be used prior to treating any surface with chemicals or coatings such as paints or epoxies.


Silicone is a commonly used additive in adhesives, waxes, resins and other materials. Silicones on surfaces are very difficult to recognize. Often, silicone acts as a barrier to the subsequent product. Cleaning before using water-based materials or paints is therefore essential.


Apply FERTAN Silikon Remover on a clean cloth and clean the surface thoroughly, then rub with new clean cloth until dry. Do not touch or touch the surface with your bare hands.

Suitable for: Steel, Stainless Steel, Aluminum, Brass, Zinc and Galvanized Surface, Polyethylene, PTFE, NBR, Polyurethane etc.

Not suitable for: EPDM, silicone rubber, CNBR and polystyrene.

Additional information


250ml, 1 Litre, 5 Litres

According to Regulation (EC) No 1907/2006



Flammable liquid and vapor. May cause drowsiness and dizziness. Toxic to aquatic life with long lasting effects.

safety instructions

If medical advice is needed, have container or label at hand. Use only outdoors or in well-ventilated areas. Avoid release to the environment. In case of fire: use alcohol resistant foam, carbon dioxide (CO2), water spray, extinguishing powder for extinguishing.