UBS 240 Underbody Protection Set

Description

UBS 240 is a durable underbody protection based on high-quality wax and very durable.

The product contains no aromatic constituents and is PVC compatible.

It adheres even in higher layer thicknesses on all body panels, axle parts, etc.

By using special and high quality ingredients and additives, the product meets the highest demands. UBS 240 also protects perfectly against mechanical abrasion on endangered body parts, such as inner fenders, etc.

The product also protects in thin layers while remaining water-repellent. After de-rusting with FERTAN rust converter, UBS 240 offers perfect protection against rust and corrosion.

UBS 240 can not be overpainted, but can be applied thinly over, for example, painted subfloors. It remains elastic and compensates for body distortions, for example.

UBS 240 standard box processing

Shake well before use or stir product well.

Due to the special viscosity, the product can also be processed well at low temperatures using both airless and standard guns.

Vehicles coated on the underbody with UBS 240 are only thinly coated.

The result is a visually very beautiful, yet extremely stable and water-repellent protection.

For several coats apply UBS 240 in layers with a flash off time of approx. 2 hrs.

Even at high temperatures, the product can be optimally processed and does not drip.

The optimal processing temperature and the temperature of the body should be min. 20 ° C.

When applied by brush, warming in a water bath facilitates removal from the can and processing. Do not heat on ovens or other heat sources. Explosion.

Cover or mask parts that are not to be coated, such as brakes, exhaust etc.

Observe safety instructions. Without adequate ventilation, explosive mixtures may form.

processing pressure

Underbody protection Suction cup pistol approx. 5 – 9 bar

Pressure cup gun with U-protection nozzle approx. 3 – 5 bar

Clean tools immediately after use with solvent and rinse.

Store product in a cool and well-ventilated area, frost-free.

Please note

Several thin layers, applied at intervals of 12 – 48 hours, result in an extremely resistant, firmly bonded and homogeneous protective layer. Protect body seams and sheet overlaps with PREWAX Pre-Treatment Pre-Treatment wax before application to prevent long term contact corrosion.

Store product cool, but frost-free.

UBS 240

Labeling according to Regulation (EC) No 1272/2008

DANGER

Statements

Highly flammable liquid and vapor. Causes serious eye irritation. May cause drowsiness and dizziness. Causes damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects.

safety instructions

If medical advice is needed, have container or label at hand. Keep out of the reach of children. Keep away from heat / sparks / open flames / hot surfaces. Do not smoke. Use explosion-proof electrical equipment / ventilation systems / lighting. Avoid breathing dust / fume / gas / mist / vapor / spray. Avoid release to the environment. Use only outdoors or in well-ventilated areas. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if possible. Continue rinsing. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF ON SKIN: Wash with plenty of soap and water. Keep container tightly closed in a well-ventilated place. Dispose of contents / container in accordance with local / regional / national / international regulations. Repeated exposure may cause skin dryness or cracking.