FeDOX Derusting Bath
£20.84 – £94.15 (incl VAT)
- Tools and metal parts
- Casings
- Turbines and machine parts
- Interior surface of a tank, et. al.
- Description
- Additional information
- Application
- Safety information
Description
Additional information
Size | 1 litre, 5 litre |
---|
FeDOX is a corrosion remover. After treatment the metal is bright, with no corrosion. Fedox has two principal uses:
- Corrosion removal from the inside of motorcycle and car tanks.
Fedox and hot water are mixed inside the fuel tank at a ration of 1:10.
After treatment and rinsing the inside of the tank is treated with Fertan Rust Converter.
If a permanent fuel proof liner is required Tapox Tank Sealer is used.
- Corrosion removal from components.
Fedox and hot water are mixed in an open container and the components are placed in the container. The ration can vary from 1:10 to 1:3 as required.
After treatment the components are rinsed and protected as required. For engine components this may be wiping with oil. For other items the process may be Fertan Rust Converter followed by one of the other Fertan protective products.
Safety data sheet according to Regulation (EC) No. 1907/2006
DANGER
Hazard Statement
May be corrosive to metals. Causes serious irritation of the skin and serious eye damage.
Security Alert
Do not breathe mist / spray. Wear protective gloves / protective clothing / eye protection / face protection. IF ON SKIN (or hair) Remove / Take off immediately all contaminated clothing. Rinse skin with water / shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove existing contact lenses if possible, continue rinsing. Immediately call a POISON CENTER or physician.